How to increase the cooling efficiency of the air conditioner?

To increase the cooling efficiency of the air conditioner, kindly ensure that:

1. The doors and windows are tightly shut to insulate the area.
2. The windows with direct sunlight are covered with a heavy curtain.
3. Remove any item obstructing the outdoor unit and air vents on the front side.
4. Clean the filter weekly if the unit is used for more than 8 hours a day.

How to choose a correct stabilizer for the air conditioner?

High voltage may increase the possibility of damage to the electrical parts. AC will not start if line voltage is low.

In Air conditioner, the main part is compressor which is working on 180~260 volt range. To protect it from voltage fluctuation ,use stabilizer It is recommended to use an ISI marked stabilizer of correct KVA rating as per the tonnage of the AC.

There are two types of voltage stabilizers available in market, one is Floor mount and the other is Wall mount. These stabilizers are available with digital and analog, input and output voltage reading meter. To protect the compressor there is 3 min delay start. Serial. Capacity of AC (ton) Stabilizer (KVA)

1 0.5~0.8 ton 2 KVA
2 1.0~1.2 ton 3 KVA
3 1.2~1.6 ton 4 KVA
4 2.0 ~2.5 ton 5 KVA
5 3 ton 6 KVA

How to clean the filter of the Air conditioner?

To clean the filter, unplug the power cord from the mains. Open the grille vent from the bottom or side of the unit and take the air filter out. Wash the filter under running water and wait until it is dry.

What can be wrong with the remote control of the AC if its not working?

If the remote control of the AC is not working,

1. Check if the battery is installed with correct polarity.
2. Check if you are within the radius of 10 meters from the unit with no obstacle in the path of operation of the unit.
3. If the remote control still does not work, please take it to the nearest service center.

Is it normal for a sound of water flow to be heard from the air conditioner?

It is normal for the water flow to occur right after starting or stopping the air conditioner as the refrigerant flows around the unit.

Why does not cool air come instantly when the air conditioner is switched on?

It takes approx 3 min. to have the cold air working again from the time of starting the operation to restarting the unit. It automatically starts after 3 min. It is called "3 min. delay function". This is a protection device and not a malfunction

What size air conditioner do I need to buy?

The cooling capacity of an air conditioner is measured in British Thermal Units (BTU), and the capacity you require depends on the size of the room you need to cool. If you buy an air conditioner that is too small for the room it will not cool adequately. If you buy one that is too large, the air conditioner will cool the room before it dehumidifies.

Cooling capacity of an air conditioner is measured in tons so one ton AC provides 12000 BTU in one hour.

To find out which size unit is best for the room, divide the size of the room (length*breadth*height) by 1000 . It will give the ton capacity. The table below will make this task easier for you:

Air conditioner Ton requirement calculator / Chart for room

Sl No: L B H L*B*H Ton required
1 9 9 9 729 0.75
2 9 9 10 810 0.75
3 10 10 9 900 0.75-1
4 10 10 10 1000 1
5 11 11 9 1089 1
6 11 11 10 1210 1-1.5
7 12 12 9 1296 1-1.5
8 12 12 10 1440 1.5
9 13 13 10 1690 1.5
10 14 14 10 1960 1.5-2
11 15 15 10 2250 2

Make any adjustments for the following circumstances:

If the room is heavily shaded, reduce capacity by 10 percent.
If the room is very sunny, increase capacity by 10 percent.

What is the electrical consumption of the air conditioner per month?

It depends on the air conditioner model you are using and the usage pattern.

The estimated electrical consumption can be calculated by:

Estimated Electrical Consumption = Input (kW) X No. of hours used X No. of days per month X Current Electricity Rate

Why is the room not cool enough even after the air conditioner running for awhile?

It may be due to the following reasons:

1. The indoor fan coil is dirty resulting in weak dissipation of cool air.
2. The outdoor condenser is dirty and not producing cooling refrigerant
3. There may not be enough refrigerant in the air conditioning system.
4. The desired operating temperature is set too high.
5. The air conditioner installed is under-sized.

The proper room size is 10`L X10`W X10`H for 1 Ton Air-con.

In a 10 feet high room, a split type AC should be installed at 7 -8 feet for the best cooling performance. For a window type AC, the best height is 3-4 feet from the floor. If you are fixing the AC very close to the wall or in an airtight room it will trip due to high head pressure, as heat dissipation can't happen. Distance must be more than 900 mm after fixing the air-con and top of the shaft should not be closed.

How to check star rating of an Air conditioner

The star rating is provided for customer awareness by BEE (Bureau of Energy Efficiency.) Depending on the energy efficiency, air conditioners are rated on a scale of 1 to 5. Higher the star rating, lesser the power consumption.

EER is calculated by :

Cooling capacity (Watts) / Power Consumption (Watts)

For example:

One 1.5 ton AC with 5275watts cooling capacity and 1650Watts power consumption, so EER of unit is 5275/1650=3.1 EER with star rating 4.

Is regular air conditioner service a benefit?

Regular service of the air conditioning equipments will provide the following benefits:

1. The air conditioner will cool better
2. The electrical consumption of the air conditioning equipments will be lower
3. Air conditioner leaking will be minimized.
4. There will be less need for air conditioner repair.

Warranty - what is covered?

Check the Instruction Manual that comes with the product. Most manufacturers warranty all parts and labour for one (1) year from date of sale and 5 years for compressor for normal usage. Cosmetic parts, like the filter, grille or knobs, are usually not covered

How to transfer images from the camera to the Windows operated computer?

Connect the camera to the computer using the USB cable. Turn the camera on and select the computer option. The computer will detect the new hardware. Select the 'REMOVABLE DISK' icon from the 'MY COMPUTER' icon in the computer. The images taken with the camera are stored in a folder there. Copy the folder. The folder will be saved in the computer in 'MY DOCUMENTS'. The photos can be viewed in the computer from this folder.

What to do if the camera is not recognized by the computer?

The camera may not be recognized by the computer due to the following reasons:

  • Turn the camera off. Remove the USB cable and plug it in again. Turn on the camera and try connecting again.
  • Do not connect through a USB hub or at the USB port in front of the computer. Connect the camera to the PC directly or to the USB at the back of the computer only.
  • Some security software does not recognize the camera as a removable disk. Temporarily disable the software in such cases.
Can I recover deleted pictures?

Some models have a 'RECYCLE BIN' function. If the function is set on, the deleted photos will be stored in this temporary folder.

Why is my camera battery draining quickly?

When the camera is operated in a cold environment or if the zoom and flash function is used frequently or recording videos the battery drains quickly. If the battery drains quicly while the LED on the charger shows full battery charge, the battery is malfunctioning and needs to be replaced.

What to do if there is a memory card error?

In case of a memory card error, turn camera off, remove memory card and insert and format the card again.

What can I do if I cannot eject the memory card?

If you cannot eject the memory card, do not pull it out by force. Take the camera to an authorized service centre and get it removed by the technician.

What to do if horizontal lines appear on LED?

This is due to exposure problem from defective lens parts. Please contact the service center.

What to do if there is external damage to the camera?

External damage like cracks, screen damage not caused by normal use is not covered by warranty. It will be rectified by the service center on a chargable basis.

What to do if the camera beeps and powers off when switched on?

If the camera powers off on its own when the batteries are incorrectly inserted, the batteries have to be recharged or replaced or wrong type of batteries are used. If it is not one of the above mentioned reasons, please contact the servide center.

Can the digital camera be put on the x-ray machine in the airport?

There is no harm to the camera if its put on the x-ray machine in the airport.

Will the pictures be lost if the battery is removed?

The pictures will not be lost as they are stored in the memory card.

Can the dishwasher be used to wash plastic or casserol or pet vessels?

While using these vessels, use programs like Quickwash, delicate wash or eco wash as they will not be able to withstand higher temperatures.

Can tawa, kadhai, pressure cooker, non stick or hard ionized vessels be washed in the dishwasher?

You can wash these vessels by placing them facing the spray in the adjustable trays.

Is dishwashing effective for Indian cooking?

Dishwashers are capable of cleaning any kind of dirt with their unique washing system and so are effective for Indian cooking.

Can normal detergent be used for the dishwasher?

The efficiency of the normal detergent will not be the same as the brand recommended by the manufacturer.

What is special salt?

Special salt reduces the hardness of the water to ensure better cleaning of the vessels.

What is the correct Water Temperature?

The entering water must be at least 120 degrees Fahrenheit and not more than 150 degrees Fahrenheit for the best cleaning and to prevent damage to the dishes.

How to choose and Use the right detergent?

Use only powder, liquid or tablet detergent designed specifically for automatic dishwashers recommended by the Dishwasher manufacturer. Any other types may cause poor wash performance.

Use the right amount of detergent for the wash. Use enough detergent for the wash, but don't use more than needed. Do keep in mind that hard water requires more detergent than soft water and cooler water requires more detergent than hot water.

Store the detergent in a container away from moisture to prevent lumps as lumpy detergent will not clean well. Put detergent in the cup only when the dishwasher is ready for use.

Why is the wash performance of the Dishwasher poor?

Before maintenance or cleaning of the dishwasher, unplug the dishwasher from the power supply.
  • The water pressure to the dishwasher should be 20 - 120 PSI. Check the water pressure.
  • Select the appropriate cycle for the dish load. A light wash cycle may not properly wash a heavy load, though it may save on water and energy.
  • Hot water(atleast 120 degree Fahrenheit) dissolves and activates the detergent to remove food soils. Correct water temperature is needed to achieve good results from your dishwasher and the detergent. Check the water temperature.
  • Check the amount of detergent to be used for the water type, water temperature and food soils. Hard water requires more detergent than soft water and cooler water requires more detergent than hot water.
  • The dishwasher should be loaded properly so that water reaches all the soiled surfaces in all the racks.
Remember these common loading guidelines:
    1. Larger items should not block smaller items from the wash action. Items in both racks should be separated and face the center of the dishwasher so water reaches all the surfaces.
    2. Glasses should be placed with the open end facing downward to allow proper wash action.
    3. Do not place flatware one on top of the other as water will not flow between the surfaces.
    4. Knives should be loaded with handles up.
    5. Do not block water system like the spray arms.

  • Food particles may clog the filters and reduce the wash performance. To avoid this, scrap the food particles from the dishes before placing them in the dishwasher.

What to do if the door will not latch properly?

Check if the gaskets on the door are seated properly. The gaskets will get more pliable after a few uses.
Check if all the items are placed within the racks and are not sticking out beyond the racks. Do make sure that small items are not obstructing the closing of the door.

What to do if the dishwasher does not function when switched on?

Please ensure that the door is closed properly.
If the model has child lock features, please turn it OFF.
Operating the dishwasher atleast once a week keeps the seals in the motor from drying out and not functioning.

What if the Dishes are not drying properly?

It is normal for some water to remain in the bottome of the dishwasher after a dry cycle.

If dishware is not drying properly, please check for the following conditions:
Water entering the dishwasher should be of the correct temperature for best wash and dry performance.
Unload lower rack first as water from the upper rack can spill onto the lower rack.
Do not overload dishes.
Dishes should not touch. Indents or etchings in the dish may allow water to pool which results in the dishes remaining wet at the end of the cycle.

What if the water does not drain and leaks from the Air Gap?

If water is covering the bottom of the tub, the dishwasher is not draining properly.

Unplug the appliance from the power socket and check the following:

Check for objects blocking the drain pipe.
Use only detergents specifically designed for automatic dishwashers and the correct amount of detergent.
If these suggestions do not rectify the problem, please contact the service center.

Is dirty water circulated over and over again in the dishwasher and are dishes washed in the same water?

Dishwashers , at the beginning of the wash cycle, flush out the entire left over food out of the system by a high power jet. The main wash has 2 pre wash and 2 post wash rinse with fresh water for a clean thorough wash.

What to do if the dishwasher has an odor?

If a small amount of water is left over from the last wash cycle and the dishwasher is not used regularly, it causes an odor. To remove the odor, add detergent and run the dishwasher empty for a full cycle.

What to do if the Disc is not playing or display shows no Disc?

If the DVD player display says 'No Disc'

  • Check the CD for any scratches / dust
  • Check if the disc is right side up on the tray.
  • Some pirated CD's will not work.
  • Try other discs to see if the problem is with specific types or with all.
  • Check if the DVD player supports the type of disc.
  • Unplug the DVD Player from power source and let sit for one minute.
  • Clean the DVD player's laser lens, using a DVD lense cleaner. Try playing the disc again.

Can MP3 play on the DVD without TV ?

DVD player usually needs TV to play Mp3 sound output. But some DVD's have an Inbuilt amplifier with jacks(located at the back of the DVD player) for sound output. For such DVD player to play Mp3 without TV you require Speakers (that is according to the capacity of the built in amplifier) that you have to attach with your DVD player Sound Output to play your Mp3

Some DVD player does not have Sound Output and built in Amplifier. So you require speakers with Built in amplifier (Amplifier according to your requirement) that is connected to the DVD player using the Microphone Jack in the DVD player.

The Home Theater or Audio System can also be connected to the DVD to have better sound Output.

What is DivX?

DivX is a brand name of products created by DivX Inc. DivX can compress lengthy video segments into small sizes while maintaining relatively high visual quality.

What is 5.1 channel output?

5.1 channel is a set of six analog outputs, one for each of the Dolby Digital channels (left front, center, right front, left rear, right rear and subwoofer).

What is Stereo outputs?

These outputs carry only the stereo music signal. It is used only if the DVD player is hooked to a TV that has only two speakers.

What to do if the DVD Tray is not opening?

Please check the power supply It might be due to some mechanical problem or loose cable connection in the DVD. Please contact the Service Center to correct the problem.

Can an overseas DVD player be used locally or a local DVD player overseas.

This will depends on:

1. DVD region code issue

Region code system is used to protect copyrights. Your player has a region code printed on the back of the unit and only will play DVD discs with identical region codes. . If you try to play any other region DVD, the message "Playback prohibited by area limitations." will appear on the TV screen. Some DVD disc labeled as "ALL Region" can be played on the player.

The DVD Forum has split the world into six regions. The six regions are :

Region 1: Canada, U.S. and U.S. territories
Region 2: Europe, Egypt, Greenland, Japan, Middle East and South Africa
Region 3: Hong Kong, Indonesia, Korea, Malaysia, Philippines, Singapore and Taiwan
Region 4: Australia, Caribbean, Central America, Mexico, New Zealand, Pacific Islands and South America
Region 5: Most of African continent, (Former Russia), Eastern Europe, India, Mongolia and North Korea
Region 6: China

2. Mains Voltage condition

As power supply voltages vary by country between 120V and 240V, a 120V DVD player must not plug into a 240V mains (power) supply. The voltage specification is printed on the back of the DVD player.

3. Video standard (PAL/NTSC/SECAM) matter

There are three main type of video standard in the world, namely PAL, NTSC and SECAM. A NTSC DVD disc cannot play on a PAL DVD player unless the Player is compatible with both PAL and NTSC system. The television been used should also a PAL and NTSC compatible, otherwise the picture will appear black and white or not chear.

What types of DVD players are there for home use?

  • There are five types of DVD players to choose – standard, multiple, combo, portable, and recorder.
  • A standard player only holds one disc at a time, while multiple players store many DVDs, but play one disc at a time.
  • A combo is paired with a home theatre system as a separate unit or part of a television set.
  • Recorders allow a person to record programs on a DVD video disc. A portable unit is a DVD player and monitor in one. The screen is usually 10" or smaller, and are used to play movies on the move.

What's the difference between DVD and Blu-ray Disc?

DVDs were designed with standard-definition TVs in mind. They' are not able to use the benefits of high-definition TVs. As televisions have become more advanced, DVD's limitations have become more apparent.

Blu-ray is a high-definition disc format designed to maximize the viewing experience available from HDTVs. Blu-ray discs and players offer improved picture and sound quality.

Why do some DVD movies include two versions (regular and widescreen)?

"Standard" (or "Full Frame") is formatted to fit the screen of regular TV (4:3 or 1.33:1 aspect ratio). "Widescreen" covers a range of wide formats from 1.78:1 to 2.35:1 and beyond. These wide formats look better on a TV with 16:9 (1.78:1) screen aspect ratio because they fill up more of the screen, and are preferred.

Movies that are only available in widescreen can also be viewed on a standard TV, with horizontal black bars above and below the image. The DVD's packaging says which versions are on the disc.

How good are Blu-ray and DVD players at playing music CDs?

Blu-ray and DVD players make excellent CD players and some players can also play high-resolution audio. A Blu-ray or DVD player's advanced disc transport and digital-to-analog converters are designed for the demanding task of reading and processing the huge amounts of audio and video information on Blu-rays and DVDs

If I get a Blu-ray player, can I use my old DVDs?

Yes. Blu-ray players sold are backward compatible, so they'll play the standard DVDs as well as Blu-ray discs.

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
Does the camcorder have automatic focus problems?

It is difficult for the camcorder to automatically focus objects too near, fast moving objects, low contrast objects, objects in dark environment and distinctive light source.

Is the hard disk protected from fall?

In the case of a fall, shock absorbers and sensors disconnect the write head from the hard disk to prevent data loss.

What to do if the battery is not charging?

Always use the original battery and charger. Do not use counterfeit products. It is recommended to charge the battery in the temperature range of 10-30*C.

If charging the battery when attached to the camcorder ensure that the battery is firmly attached, the adaptor is securely connected and the camcorder is turned off. Battery is not charged if the camcorder is turned on.

If charging using the battery charger and the charge lamp does not light, wipe the terminals with a dry cloth and try again.

If the problem persists, contact the service center.

What to do if the camcorder automatically turns off?

The camcorder has an auto turn off function wherein it automatically shuts off when not used for 5 minutes to save battery power. This function can also be disabled.

What if there is no image in the LCD screen while recording?

Adjust the brightness setting of the LCD screen and check. It is difficult to see the image on the LCD screen when exposed to direct sunlight. Block the sunlight and check. If the problem persists, contact the service center.

Why does the recorded image look blurred?

Wipe the lens with a soft cloth. When there is much temperature difference or high humidity, moisture condensation occurs inside the lens. Remove the battery and memory card and dry the camcorder till the condensation disappears. If the problem persists, contact the service center.

Why does the camera or battery become warm?

The camcorder or battery is heated to a certain extent during operations. If the screen shows an error message warning of high temperature, turn off the device and wait for it to cool.

What if the lens cover does not open or close properly?

If the lens cover does not open or close properly, please get it rectified by the service center. This may happen because of deformation or water or sand may have got in.

What if the battery runs out soon?

The battery may not be fully charged or it may be at a very high or how temperature. Always charge the battery at room temperature.

Can the recorder pictures be edited?

Simple editing and deleting can be done with the camcorder with the software supplied.

Can the audio level be manually adjusted when recording?

There is no manual adjustment. The user can select a low or normal level in the microphone setting.

Can the videos recorded be written back from the computer to the camcorder or memory card?

Image files recorded in the camcorder are managed by the image database. Image files not registered to the database files cannot be recognized by the camcorder. The camcorder cannot recoginse the image files that are modified in the computer and copied.

How to take better picture?

You can take better pictures by adjusting the scene condition.

Can data deleted from the memory card be restored?

Memory card file rescue will aid in recovering files from the memory card. However, there is no guarantee of recovery of all data. Recovery of JPG, MPEG-1, MP4, AVCHD is possible. Game data and content protected music and movies cannot be recovered.

What is AVCHD?

AVCHD stands for Advanced Video Coding High Definition and is the format for recording and play back of high definition videos.

What type of dishes are to be used in a microwave oven?

Ceramic, chinaware, porcelain, borosil, glass and thermoplasic wares without metal trimmings and decoration can be used in a microwave oven.

How to check if a dish is microwave safe?

To check if a dish is microwave safe, fill a cup with water and keep it in the microwave on the dish and heat for a minute. If the water becomes hot and the dish cool, then the dish is microwave safe. If the dish heats up, it should not be used for microwaving.

How to clear the odor in the microwave oven?

Unplug the microwave from the power supply. Clean up spills and splatters as they occur. Wash the interiors with baking soda and let it dry. It the odor persists, mix 6 spoons of baking soda in a cup of water or half cup of lemon juice in a cup of water and heat in the microwave for 2 to 3 minutes.

Leave the door open for 2-3 hours when the oven is not in use to let the air out. Strong odor like fish or burned popcorn take several days to wear away.

What food cannot be cooked in a microwave oven?

Chapattis, tandoori rotis, deep fried items like puris, vadas and boiling eggs cannot be cooked in a microwave.

Can metal be put in microwave oven?

Microwaves cause currents to flow in metals which may heat the metal hot enough to cause a fire. Metallic decorations on porcelain damages the porcelain when it gets hot. Thick pieces of metal reflect the microwaves which causes the food to cook unevenly. The current flowing in the metal produce sparks at sharp points which causes fire.

Can I switch on microwave when empty?

The microwaves created by the magnetron travels into the cooking chamber and has to be absorbed there. As there is no food there, these microwaves will not be absorbed and will eventually come back to the magnetron. The magnetron will absorb microwaves as it emits and is hard on the magnetron. So it is advisable not to run the microwave empty.

Why can't potato wrapped in foil be cooked in a microwave?

A potato wrapped in foil cannot be cooked in a microwave because the foil will reflect the microwaves and the potato will not get cooked.

Why is standing time needed after microwave cooking?

Once microwave cooking is done, the food continues getting cooked evenly during the standing time. The standing time depends on the density of the food.

Can browning of food be done in the microwave?

Browning is caused at a high temperature due to the breakdown of proteins and carbohydrates. The reaction between amino acids and sugar and the hot air in the oven causes the surface to dry causing the browning effect.

In a microwave oven the food temperature is not very high and a 'browner' has to be used. Browning can be done in a convention microwave oven which has a conventional grill and has a browning element.

How is heating in a microwave oven different from heating in a conventional oven?

The air in the oven cavity is heated in a conventional oven. The heat is transferred to the vessel and then to the food. In a microwave oven, the microwaves enter the cavity and pass through the vessel and to the food. They cause the water and food molecules to vibrate very fast and produce heat in the food which cooks the food. The air nor the cooking vessel is heated.

Which is the preferred shape of microwave cooking dishes?

In a square dish the microwave energy concentrates at the corners, overcooking the food. Round dishes give even cooking results. Microwaves penetrate to a depth of 1.5 to 2 inches. Hence, shallow, round and straight sided dishes are better.

Why is the cooking time in the Microwave oven different from that in the user guide or recipe book?

If the microwave is not cooking as fast as mentioned in the cooking guide, check if you have followed the instructions exactly. Cooking guides suggest heat and time settings to avoid over cooking of food. Variations in size, shape and weight may require longer cooking tome. . Please get used to your microwave oven. Use your judgement with the guidelines from the cooking guide to cook good properly.

Is microwave cooking a nutritious method of cooking?

Nutritive value of food is determined by the method and duration of cooking. Loss of nutrients occur in conventional heating, frying and cooking over long periods as vitamins and other nutrients deteriorate with time at high temperature. Microwave heating is quicker and retains water soluble nutrients

Why are clothes still wet even after the spinning process?

The outlet hose could have been lifted higher than the washing machine's drain outlet, hence causing a restriction for the water to flow out of the outlet hose.

Why does the machine shake while spinning?

Disconnect the power before working on the electrical appliance. Check the following:

  • Balance the load of clothes by opening the door, and looking to see if there is a lot more on one side of the agitator than the other, and if this is the problem, move them around, close the door, restart the spin cycle, and observe the results.
  • Try to tip or tilt the machine. If it wobbles when you do, the adjustment screws on the machine's base may not be set correctly. Relevel your machine and insure it is supported correctly. This is done by kneeling down in front of the machine, and rocking it to see which corner seems to be floating, or not in contact with the floor.

Is there noise during spinning?

Noise during spinning is mainly due to unbalanced laundry. Place the clothes evenly in the tub. Otherwise, the tub will hit the body and make the noise.

How to open the locked door with the tub filled with water?

The door cannot be opened when there is water in the washing machine for safety reasons. If you want to open the door during the washing cycle, press the STOP button. If the tub is full of water, select SPIN to drain the water. The door will open.

Why should the washing machine be level?

The washing machine should be level to reduce noice and vibration and proper operation. Tilting of machine causes noice, vibration and residual of detergent.

What if the washing machine does not spin?

If the washing machine does not spin, check if the machine is on stable level surface and if the laundry is spread evenly in the machine.

What if the washing machine is not working?

If the washing machine is not working check if the water tap is open, washer plugged in, if the power is cut off or if there is enough water before calling the service center.

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.